XP和ＬＩＮＵＸ双系统,无法进入XP，求救中
zcxbdkf
|
1#
zcxbdkf 发表于 2009-01-08 18:43
XP和ＬＩＮＵＸ双系统,无法进入XP，求救中
我在XP下安装了双系统,结果XP就进不去了,我是用PＭ分区之后光盘安装的ＵＢＵＮＴＵ８．１０,结果选择ＸＰ时，就不断地重新回到操作系统选择界面，根本无法进入ＸＰ系统，搞得快崩溃了，各位高手指点一下啊，多谢了
sudo fdisk -l信息如下： Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x81ec81ec Device Boot Start End Blocks Id System /dev/sda1 * 1 3824 30716248+ c W95 FAT32 (LBA) /dev/sda2 3825 14593 86501992+ f W95 Ext'd (LBA) /dev/sda5 3825 5446 13028683+ b W95 FAT32 /dev/sda6 5447 5510 514048+ 82 Linux swap / Solaris /dev/sda7 5511 6754 9992398+ 83 Linux /dev/sda8 7997 11473 27928971 b W95 FAT32 /dev/sda9 11474 14070 20860371 b W95 FAT32 /dev/sda10 14071 14593 4200966 83 Linux /dev/sda11 6755 7996 9976333+ 83 Linux menu.lst信息如下： # menu.lst - See: grub(, info grub, update-grub( # grub-install(, grub-floppy(, # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. # # You can specify 'saved' instead of a number. In this case, the default entry # is the entry saved with the command 'savedefault'. # WARNING: If you are using dmraid do not use 'savedefault' or your # array will desync and will not let you boot your system. default 0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). timeout 10 ## hiddenmenu # Hides the menu by default (press ESC to see the menu) #hiddenmenu # Pretty colours #color cyan/blue white/blue ## password ['--md5'] passwd # If used in the first section of a menu file, disable all interactive editing # control (menu entry editor and command-line) and entries protected by the # command 'lock' # e.g. password topsecret # password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/ # password topsecret # # examples # # title Windows 95/98/NT/2000 # root (hd0,0) # makeactive # chainloader +1 # # title Linux # root (hd0,1) # kernel /vmlinuz root=/dev/hda2 ro # # # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=UUID=fdd1a80d-e04a-4a72-9670-1ff67d97bd0e ro locale=zh_CN ## default grub root device ## e.g. groot=(hd0,0) # groot=fdd1a80d-e04a-4a72-9670-1ff67d97bd0e ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions=quiet splash ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(recovery) single # altoptions=(recovery mode) single ## controls how many kernels should be put into the menu.lst ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## should update-grub add savedefault to the default options ## can be true or false # savedefault=false ## ## End Default Options ## title Ubuntu 8.10, kernel 2.6.27-7-generic uuid fdd1a80d-e04a-4a72-9670-1ff67d97bd0e kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=fdd1a80d-e04a-4a72-9670-1ff67d97bd0e ro locale=zh_CN quiet splash initrd /boot/initrd.img-2.6.27-7-generic quiet title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode) uuid fdd1a80d-e04a-4a72-9670-1ff67d97bd0e kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=fdd1a80d-e04a-4a72-9670-1ff67d97bd0e ro locale=zh_CN single initrd /boot/initrd.img-2.6.27-7-generic title Ubuntu 8.10, memtest86+ uuid fdd1a80d-e04a-4a72-9670-1ff67d97bd0e kernel /boot/memtest86+.bin quiet ### END DEBIAN AUTOMAGIC KERNELS LIST # This is a divider, added to separate the menu items below from the Debian # ones. title Other operating systems: root # This entry automatically added by the Debian installer for a non-linux OS # on /dev/sda1 title Microsoft Windows XP Professional root (hd0,0) savedefault makeactive chainloader +1 望高人予以指点，我已经自己弄了一天，都没有成果，ｘｐ还是在选择进入之后立即又重新启动，汗颜中ｉｎｇ，希望能够尽快解决，感激不尽！ |