诚心求解：SAMBA配置问题!
c2online
|
1#
发表于 2007-04-20 23:25
诚心求解：SAMBA配置问题!
本人愚钝用了两天时间没有配好一个SAMBA服务，我不知怎么的他就是不能访问现将我的smb.conf smbpasswd smbusers文件粘出来还望指点！！！！
smb.com文件如下: # This is the main Samba configuration file. You should read the# smb.conf(5) manual page in order to understand the options listed# here. Samba has a huge number of configurable options (perhaps too# many!) most of which are not shown in this example## Any line which starts with a ; (semi-colon) or a # (hash)# is a comment and is ignored. In this example we will use a ## for commentry and a ; for parts of the config file that you# may wish to enable## NOTE: Whenever you modify this file you should run the command "testparm"# to check that you have not made any basic syntactic errors.##======================= Global Settings =====================================[global]# workgroup = NT-Domain-Name or Workgroup-Name workgroup = workgroup# server string is the equivalent of the NT Description field server string = sharefile server# This option is important for security. It allows you to restrict# connections to machines which are on your local network. The# following example restricts access to two C class networks and# the "loopback" interface. For more examples of the syntax see# the smb.conf man page; hosts allow = 192.168.1. 192.168.2. 127.# if you want to automatically load your printer list rather# than setting them up individually then you'll need this; load printers = no; printcap name = /etc/printcap# It should not be necessary to spell out the print system type unless# yours is non-standard. Currently supported print systems include:# bsd, sysv, plp, lprng, aix, hpux, qnx, cups; printing = cups# Uncomment this if you want a guest account, you must add this to /etc/passwd# otherwise the user "nobody" is used; guest account = pcguest# this tells Samba to use a separate log file for each machine# that connects log file = /var/log/samba/%m.log# Put a capping on the size of the log files (in Kb). max log size = 0# Security mode. Most people will want user level security. See# security_level.txt for details.# Use password server option only with security = server# The argument list may include:# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]# or to auto-locate the domain controller/s# password server = *; password server = <NT-Server-Name># Password Level allows matching of _n_ characters of the password for# all combinations of upper and lower case. password level = 8 username level = 8# You may wish to use password encryption. Please read# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.# Do not enable this option unless you have read those documents smb passwd file = /etc/samba/smbpasswd# The following is needed to keep smbclient from spouting spurious errors# when Samba is built with support for SSL.; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt# The following are needed to allow password changing from Windows to# update the Linux system password also.# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.# NOTE2: You do NOT need these to allow workstations to change only# the encrypted SMB passwords. They allow the Unix password# to be kept in sync with the SMB password.; unix password sync = Yes; passwd program = /usr/bin/passwd %u; passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*# You can use PAM's password change control flag for Samba. If# enabled, then PAM will be used for password changes when requested# by an SMB client instead of the program listed in passwd program.# It should be possible to enable this without changing your passwd# chat parameter for most setups.; pam password change = yes# Unix users can map to different SMB User names# Using the following line enables you to customise your configuration# on a per machine basis. The %m gets replaced with the netbios name# of the machine that is connecting; include = /etc/samba/smb.conf.%m# This parameter will control whether or not Samba should obey PAM's# account and session management directives. The default behavior is# to use PAM for clear text authentication only and to ignore any# account or session management. Note that Samba always ignores PAM# for authentication in the case of encrypt passwords = yes; obey pam restrictions = yes# Most people will find that this option gives better performance.# See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192# Configure Samba to use multiple interfaces# If you have multiple network interfaces then you must list them# here. See the man page for details.; interfaces = 192.168.12.2/24 192.168.13.2/24 interfaces = 192.168.3.111/22# Configure remote browse list synchronisation here# request announcement to, or browse list sync from:# a specific host or from / to a whole subnet (see below); remote browse sync = 192.168.3.25 192.168.5.255# Cause this host to announce itself to local subnets here; remote announce = 192.168.1.255 192.168.2.44# Browser Control Options:# set local master to no if you don't want Samba to become a master# browser on your network. Otherwise the normal election rules apply local master = yes# OS Level determines the precedence of this server in master browser# elections. The default value should be reasonable; os level = 33# Domain Master specifies Samba to be the Domain Master Browser. This# allows Samba to collate browse lists between subnets. Don't use this# if you already have a Windows NT domain controller doing this job domain master = yes# Preferred Master causes Samba to force a local browser election on startup# and gives it a slightly higher chance of winning the election preferred master = yes# Enable this if you want Samba to be a domain logon server for# Windows95 workstations. security = SHARE domain logons = yes# if you enable domain logons then you may want a per-machine or# per user logon script# run a specific logon batch file per workstation (machine); logon script = %m.bat# run a specific logon batch file per username; logon script = %U.bat# Where to store roving profiles (only for Win95 and WinNT)# %L substitutes for this servers netbios name, %U is username# You must uncomment the [Profiles] share below; logon path = \\%L\Profiles\%U# Windows Internet Name Serving Support Section:# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server; wins support = yes# WINS Server - Tells the NMBD components of Samba to be a WINS Client# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both; wins server = w.x.y.z# WINS Proxy - Tells Samba to answer name resolution queries on# behalf of a non WINS capable client, for this to work there must be# at least one WINS Server on the network. The default is NO.; wins proxy = yes# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names# via DNS nslookups. The built-in default for versions 1.9.17 is yes,# this has been changed in version 1.9.18 to no.; dns proxy = no# Case Preservation can be handy - system default is _no_# NOTE: These can be set on a per share basis; preserve case = no; short preserve case = no# Default case is normally upper case for all DOS files; default case = lower# Be very careful with case sensitivity - it can break things!; case sensitive = no#============================ Share Definitions ==============================[homes] comment = Home Directories browseable = yes writeable = yes valid users = %S create mode = 0664 directory mode = 0775# If you want users samba doesn't recognize to be mapped to a guest user; map to guest = bad user# Un-comment the following and create the netlogon directory for Domain Logons; [netlogon]; comment = Network Logon Service; path = /usr/local/samba/lib/netlogon; guest ok = yes; writable = no; share modes = no# Un-comment the following to provide a specific roving profile share# the default is to use the user's home directory;[Profiles]; path = /usr/local/samba/profiles; browseable = no; guest ok = yes# NOTE: If you have a BSD-style print system there is no need to# specifically define each individual printer[printers] comment = All Printers path = /var/spool/samba browseable = no# Set public = yes to allow user 'guest account' to print printable = yes# This one is useful for people to share files;[tmp]; comment = Temporary file space; path = /tmp; read only = no; public = yes# A publicly accessible directory, but read only, except for people in# the "staff" group[public] comment = Public Stuff path = /home/samba guest ok = yes writeable = yes printable = no write list = @staff# Other examples.## A private printer, usable only by fred. Spool data will be placed in fred's# home directory. Note that fred must have write access to the spool directory,# wherever it is.;[fredsprn]; comment = Fred's Printer; valid users = fred; path = /home/fred; printer = freds_printer; public = no; writable = no; printable = yes# A private directory, usable only by fred. Note that fred requires write# access to the directory.;[fredsdir]; comment = Fred's Service; path = /usr/somewhere/private; valid users = fred; public = no; writable = yes; printable = no# a service which has a different directory for each machine that connects# this allows you to tailor configurations to incoming machines. You could# also use the %U option to tailor it by user name.# The %m gets replaced with the machine name that is connecting.;[pchome]; comment = PC Directories; path = /usr/local/pc/%m; public = no; writable = yes# A publicly accessible directory, read/write to all users. Note that all files# created in the directory by users will be owned by the default user, so# any user with access can delete any other user's files. Obviously this# directory must be writable by the default user. Another user could of course# be specified, in which case all files would be owned by that user instead.;[public]; path = /usr/somewhere/else/public; public = yes; only guest = yes; writable = yes; printable = no# The following two entries demonstrate how to share a directory so that two# users can place files there that will be owned by the specific users. In this# setup, the directory should be writable by both users and should have the# sticky bit set on it to prevent abuse. Obviously this could be extended to# as many users as required.;[myshare]; comment = Mary's and Fred's stuff; path = /usr/somewhere/shared; valid users = mary fred; public = no; writable = yes; printable = no; create mask = 0765</PRE> *******lmhosts文件： 127.0.0.1 localhost192.168.3.111 chen</PRE> *********smbusers:</PRE> # Unix_name = SMB_name1 SMB_name2 ...root = administrator adminnobody = guest pcguest smbguestcface = cface</PRE> ****************** smbpasswd:</PRE> cface:500:35CFE92DDBD86FDAAFFA7AF3D23EA4D5:AB9AE91C119487A01EA193D783FEA0DD:[UX ]  CT-4627DEA6:*************</PRE>望给出指点感激不尽</PRE></PRE> |