FC5下无法路由上网
具体设置
路由IP:192.168.0.1
机器IP:192.168.0.2
网关IP:192.168.0.1
只有一块网卡,激活后可以ping通192.168.0.2但是无法ping通192.168.0.1(路由)
DNS也设置好了
路由上试过使用DHCP和直接指配主机IP,单都不行
FC5上也试过使用指派IP和DHCP但也不行
通过路由进行ADSL拨号上网
在WIN下可以正常上网
网卡在未激活的情况下
ifconfig -a 后显示如下
eth0 Link encap:Ethernet HWaddr 00:F0:4C:8A:38:A0
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:5 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5542 errors:0 dropped:0 overruns:0 frame:0
TX packets:5542 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8399899 (8.0 MiB) TX bytes:8399899 (8.0 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
======================================
激活网卡后
ifconfig -a 后显示如下
eth0 Link encap:Ethernet HWaddr 00:F0:4C:8A:38:A0
inet addr:192.168.0.2 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::2f0:4cff:fe8a:38a0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:300 (300.0 b) TX bytes:0 (0.0 b)
Interrupt:5 Base address:0x2000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5545 errors:0 dropped:0 overruns:0 frame:0
TX packets:5545 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:8400055 (8.0 MiB) TX bytes:8400055 (8.0 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
========================================
这到底是怎么回事???????
谁能给个答案哪?