How to setup Linux PC CCcam server under 1 hour with ClarkConnect This tutorial helps you to setup a Linux PC CCcam server under 1 hour, even for users with no Linux knowledge.
如何建立LINUX PC CCcam 服务器在1小时内用ClarkConnect，这是辅导帮助你如何建立一个Linux PC CCcam 服务器在1小时下，甚至用户没有LINUX知识
We need some old working PC. Hardware: Pentium 3 or Amd 600Mhz and up , 256mb ram, from 5gb HDD and up,Networkcard, and a simple 1mb videocard.
我们需要一些旧的电脑，硬件：P3或AMD600MHZ以上，256内存。5G以上的硬盘和网卡，1M显存的显卡。
Intro:
介绍：
Out there are many Linux distro's. With most of them you can build a good share server, but we use today
LINUX有许多的发行套件，使用他们的大多数你可以建立一个好的共享服务器，但我们今天使用：
"ClarkConnect".
"ClarkConnect".
What is ClarkConnect you ask!?, ClarkConnect is a powerful and affordable Internet server and gateway solution based
你问什么是ClarkConnect，ClarkConnect是强大的，有负载能力的Internet服务器和基本的网关解析
on RedHat. http://www.clarkconnect.com/
在RedHat. http://www.clarkconnect.com/
Is it stable!? Yes it is very stable and works almost perfectly with CCcam.
它稳定吗？是的，它非常的稳定，工作几乎完美对CCcam
No Graphical User Interface (GUI) except the Dashboard over what you can monitor add new modules etc in your server
没有图形界面除了Dashboard以外，你可以监视增加新的组件etc在你的服务器中
easy and comfortable to use.
使用容易并且舒服
OK lets start now.
好了，让我们现在开始
1: Download and burn it to a CD. Link for ClarkConnect iso:
第一步：下载刻录ClarkConnect iso到一张CD盘
ftp://community-42:hiptop@ftp.cl ... mmunity-4.2.SP1.iso
If you do not know how do burn it to CD here is help for that too:
如果你不知道如何刻录CD这里有帮助
http://www.clarkconnect.com/help/flash/install_burn.html
2: In install mode please select language what you want to use. Then select install from "CDrom" then "standalone and use manual IP table. From modules select only "FTP" other stuff from modules you do not need for share server! Select automatic partition.
第二步，在安装模式选者你想用的语言，这时，选择从CD-ROM安装，选择单机和用户手工设定IP，从组件里只选择“FTP”，你不需要组件里的其他的东西，对共享服务器来说。选择自动分区。
3: Now if ClarkConnect is installed and you used manual IP table then you can unplug monitor and keyboard from PC
you do not need them anymore.
If you used automatic DHCP then log to server from current monitor and keyboard to know what IP your server has.
Use command: ifconfig
Now you see your server IP, unplug monitor and keyboard from PC.
第三步：现在如果ClarkConnect已经安装完毕并且你已经手工设置了IP，这时你可以拔下你的显示器和键盘
你不再需要他们了。
如果你使用的是自动DHCP分配给服务器的IP，通过当前的显示器和键盘你可以知道服务器的IP是多少，
使用命令：ifconfig
现在你看见你的服务器IP，不插显示器和键盘
4: Now open from your regular PC webbrowser and add such line:
https://192.168.1.15:81/
Of course you need put there your server IP! And you are on Dashboard.
第四步：现在打开你的正常PC的WEB浏览器，加入如下行
https://192.168.1.15:81/ （译者注：估计是加入可信站点）
当然，你需要输入你的服务器IP地址在，在你的Dashboard
5: Open from dashboard "Account Manager" and "Users". Create new user lets say "blabla" there and put "xxxxx"
password.
第五步：从dashboard软件打开“客户管理和”和“用户”，建立一个新的用户"blabla"，输入密码xxxx
6: Open from dashboard "Software" and "FTP" and set:
第六步：打开dashboard软件“FTP”并“设置”
Status – Running
状态—运行
On boot – Automatic
启动—自动
If that is done close the dashboard
完成后关闭dashboard
7: Download CCcam pack and totalcommander FTP client software.
U Can Find Cccam Pack In The Forum
http://www.ghisler.com/
第七步：下载CCcam pack包和totalcommander FTP client软件
Install to your regular PC totalcommander it is trial. And unpack CCcam and take out from there CCcam.x86 and
CCcam.cfg.
安装到你的正常电脑上的totalcommander是试用版的，解压CCcam，取出CCcam.x86和CCcam.cfg文件。
