请问版主为什么安装完成后一定要还原binutils！！

关键在于binutils的选择和安装！
安装完成以后还原binutils！！
请问版主为什么安装完成后一定要还原binutils！！　　　　　　

如果不还原的话，GCC将无法编译　　　　　　

给个英文原版的解释过来看看!!!　　　　　　

The binutils include a lot of bin utilities,such as ld(link tools)!
Oracle need the special ld,so you must use the special bintuils.
If you make some programs which must use ld , you must restore the binutils!　　　　　　

但LINUX的一般默认安装是没有安装这个软件包的!!!!!
所有没有应该关系不大????

MSNurcrpp@163.com　　　　　　

请问版主，我用７．２自带的binutils.ｒｐｍ去行每ａ

　　　　　　　

No,the default linux installtion include binutils.This is one of the most important packege!

jzz_zh:I don't know what you've said!　　　　　　

版主，救命！！！

我在安装完７．２不装ｏｒａｃｌｅ　８的情况下

可以完成ｐｈｐ＋ａｐａｃｈｅ的安装

如果我装了ｏｒａｃｌｅ　８就死活装不上了

我强制安装了 binutils-2.11.90.0.8-9.src.rpm及相关的一些ｒｐｍ包
具体如下
binutils-2.11.90.0.8-9.src.rpm

compat-glibc-6.2-2.1.3.2.i386.rpm compat-egcs-6.2-1.1.2.14.i386.rpm com
pat-libs-6.2-3.i386.rpm compat-egcs-c++-6.2-1.1.2.14.i386.rpm compat-egcs-objc-6.
2-1.1.2.14.i386.rpm compat-libstdc++-6.2-2.9.0.14.i386.rpm

但是这样还是装不上 可爱的ａｐａｃｈｅ＋ｐｈｐ４啊。。。。。
具体的报错信息如下（上次的报错，是我配置命令错了）这是在ｄｉ２次配置apache
的时候出错的:
+ using installation path layout: Apache (config.layout)
+ activated php4 module (modules/php4/libphp4.a)
Creating Makefile
Creating Configuration.apaci in src
cd ..; gcc -DLINUX=22 -I/usr/soft/php/php-4.0.6 -I/usr/soft/php/php-4.0.6/maint
/lib/libpthread.so.0: undefined reference to `__sysctl@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `_IO_list_unlock@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `_IO_iter_file@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `getrlimit@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `_IO_list_resetlock@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `_IO_iter_begin@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `_dl_cpuclock_offset'
/lib/libpthread.so.0: undefined reference to `__rpc_thread_destroy@GLIBC_2.2.3'
/lib/libpthread.so.0: undefined reference to `__libc_sigaction@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `_IO_iter_next@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `_IO_iter_end@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `setrlimit@GLIBC_2.2'
/lib/libpthread.so.0: undefined reference to `_IO_list_lock@GLIBC_2.2'
collect2: ld returned 1 exit status
make: *** [dummy] Error 1
Creating Makefile in src
+ configured for Linux platform
+ setting C compiler to gcc
+ setting C pre-processor to gcc -E
+ checking for system header files
+ adding selected modules
o php4_module uses ConfigStart/End
+ using system Expat
+ checking sizeof various data types
+ doing sanity check on compiler and options
** A test compilation with your Makefile configuration
** failed. The below error output from the compilation
** test will give you an idea what is failing. Note that
** Apache requires an ANSI C Compiler, such as gcc.

======== Error Output for sanity check ========
============= End of Error Report =============

Aborting!


请版主帮帮忙，给小弟指点一二？？？　　　　　　

和那些兼容没有关系，恢复你的binutils以后试试!　　　　　　

我已经恢复了７．２自带的ｂｉｎｕｔｉｌｓ，我强制安装了７．２自带的哪个版本，可还是不行阿。。。。。

对了，我装ｊｄｋ的时候，用的是比较新的编译好的ｒｐｍ包:j2sdk-1_3_1_02-linux-i386.bin，

这跟装ｊｄｋ的安装是否有关系？？

我的机器处了ｏｒａｃｌｅ，别的就是７．２自带的东西了

而且，我把ｏｒａｃｌｅ的./bash_profile也该回去了，还是不行。。。。。。。